Author Topic: RS232 to USB port adaptor  (Read 40851 times)

rblacksea

  • Newbie
  • *
  • Posts: 2
  • I'm a llama!
    • View Profile
RS232 to USB port adaptor
« on: May 02, 2004, 08:11:36 AM »
Did anyone have problem with downloading or uploading from PLC using RS232 connected to USB port through adapter (usb to rs232)?

Joel Moore

  • Full Member
  • Posts: 128
    • View Profile
Re:RS232 to USB port adaptor
« Reply #1 on: May 02, 2004, 02:19:21 PM »
I recently used a Radio Shack USB to RS232 adapter cable with no problems (to a T100MD888+).

PLCstar

  • Newbie
  • Posts: 24
  • I'm a ladder logic fool!
    • View Profile
    • Morningstar Home Page
Re:RS232 to USB port adaptor
« Reply #2 on: May 04, 2004, 11:21:24 AM »
I use this older converter,

http://support.dlink.com/products/view.asp?productid=DSB%2DS25

on my WinXP Pro Laptop.

Did not have any problems when talking to the ...888+ PLC.

At first I forgot to change the TLSERVER com port setup, since this converter comes up as COM 8 under windows, and not as a more common COM 2. Once I changed the setup, no problem.

mauro

  • Newbie
  • *
  • Posts: 2
  • I'm a llama!
    • View Profile
Re:RS232 to USB port adaptor
« Reply #3 on: November 14, 2004, 07:26:55 PM »
I have tested the USB to Serial cable from OMEGA, and it didn't worked.

However I purchased another from Manhatan, and it went perfect.

To notice, both cables use ICs from the same company (I can't recall their name). I guess that the difference could be on the full compilance of the wiring for the RS232.

support

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3170
    • View Profile
    • Internet Programmable PLCs
Re:RS232 to USB port adaptor
« Reply #4 on: January 11, 2005, 11:57:51 PM »
There are many brands of such converters in the market. Unfortunately not all of them work well with the TLServer, and some may not even work.  We now offer to our user a USB-RS232 converter shown below:

  http://www.tri-plc.com/USB-RS232.htm



This USB-RS232 converter has been tested to work with the TLServer that runs on different brands of PCs in the past few year. We are now offering this model to take the guess work out of buying the "right" USB-RS232 converter and recommend it for new users who do not already own such a converter.

This serial converter offers a short cable length from the PC USB port and jack screw receptacles at the DB9 connector end. We recommend using the DB9 cable (shipped with all starter kits) for easy connection between the converter and the PLC.
« Last Edit: October 19, 2007, 03:08:29 PM by support »
Email: support@triplc.com
Tel: 1-877-TRI-PLCS

AlbertMartinez

  • Newbie
  • Posts: 10
  • PLC-SCADA Engineering Consultant
    • View Profile
Re:RS232 to USB port adaptor
« Reply #5 on: February 13, 2005, 07:36:10 AM »
I have been successfully using an Edgeport/1 USB to RS-232 Converter for about a year. The manufucturer is Inside Out Networks (www.ionetworks.com) and the vendor is B & B Electronics (www.bb-elec.com).

Make sure that in TLServer you select the right communications port (Com1, Com2, etc) assigned to the physical USB port your USB Converter is connected to.

Sincerely;

Albert Martinez
PLC Systems Integrator Consultant
martinezalbert@netzero.com
Albert Martinez
Instrumentation & Controls Systems Integrator
50 La Cruz Avenue, Benicia, California 94510
almaralbertmartinez@gmail.com

BILL SULLIVAN

  • Guest
Re:RS232 to USB port adaptor
« Reply #6 on: January 15, 2006, 04:29:08 PM »
USB TO RS232 AVAILABLE FROM THE FOLLOWING SOURCE SOLVED MY LOCKUP AND NON PERFORMANCE WHEN USING AN ACER
MODEL 1355 LAPTOP WITH A BELKIN ADAPTER.

USB TO RS232ADAPTER THAT WORKED IS AVAILABLE FROM www.serialio.com

BILL SULLIVAN
« Last Edit: January 17, 2006, 11:01:30 AM by support »

vic

  • Guest
Re:RS232 to USB port adaptor
« Reply #7 on: June 20, 2006, 11:54:24 AM »
If you have the Radio Shack converter and it won't work on XP, use the driver from:
http://serialio.com/products/adaptors/usb_serial.htm
and it will work!!

support

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3170
    • View Profile
    • Internet Programmable PLCs
Re:RS232 to USB port adaptor
« Reply #8 on: October 12, 2007, 05:18:46 AM »
The reason why some brands of USB RS232 converter may not work in every applications is well explained by the following writeup:

http://www.lammertbies.nl/comm/info/RS-232-usb.html

Email: support@triplc.com
Tel: 1-877-TRI-PLCS