Author Topic: switching roller shutter motor with one push button  (Read 5449 times)

rozik

  • Newbie
  • Posts: 2
    • View Profile
switching roller shutter motor with one push button
« on: December 28, 2018, 09:17:13 AM »
Hi

Is it possible to control a roller shutter motor with only one push button in ladder or with custom function.

The switching must go as following   up/stop/down/stop/up/stop/down......

Is there someone who could helpe me further, ore have any suggestions.


Thanks in advance
rozik

garysdickinson

  • Hero Member
  • Posts: 502
  • Old PLC Coder
    • View Profile
Re:switching roller shutter motor with one push button
« Reply #1 on: December 28, 2018, 01:01:39 PM »
Rozik,

I would implement a simple "drum sequencer" in ladder logic.

I have attached a pdf of how you could write a sequencer for the problem that you stated.  

You should be able to copy this example and run it under the iTRILOGi simulator.

Best regards,

Gary D*ckinson
« Last Edit: December 28, 2018, 01:04:01 PM by garysdickinson »